[2022 Guide] (9 Steps) How To Connect AirPods To A Laptop

Connecting AirPods to a Windows PC is a rather simple process.

It might not be as instantaneous as pairing AirPods with other Apple devices. However, it will not take you significantly longer.

You should quickly be able to stream music and videos from your laptop.

Learn the following:

  • How to upgrade the firmware on your AirPods.
  • Why Reasons why it may be necessary to disable the Windows Swift Pair feature.
  • A simple method for pairing and unpairing AirPods with a laptop.
  • A concise guide on how to connect your Airpods to a Windows laptop.

How can I link AirPods to a Windows laptop?

To connect AirPods to a Windows laptop, insert the AirPods in the charging case with the lid open, then press and hold the case’s button until the indicator light begins to blink. You should notice your AirPods in the Bluetooth “Add a Device” window on your PC. To connect, click this link.

9 Connection steps for AirPods to a laptop (Windows)

1: Return your AirPods to their charging case

To initiate the pairing procedure, place your AirPods in their case.

Ensure that the lid is kept open.

Additionally, you need charge your AirPods before using them. Or at least have a battery percentage of at least 20 percent.

2: Press and hold the case’s button until the light begins blinking.

The back button is often referred to as the Setup button. Apple customers presumably do not utilize it that frequently. However, it is useful when connecting AirPods to a non-Apple device.

Hold the button down for a few seconds. The LED light should then begin to blink white.

If you have a Generation 1 case, the light should be located within the case, between the AirPods holders.

The light is in the front of Generation 2 cases and AirPod Pros.

Blinking indicates that your AirPods are now prepared for pairing.

3: On your Windows laptop, select the Settings option.

There are multiple methods to access the Settings menu.

One option is to click the Windows icon in the lower-left corner of the screen. Once the menu appears, the Settings option should be visible. It is the one containing a gear icon.

There is a speedier alternative. Press the Windows key and the letter I on your keyboard at the same time.

4: Click Devices within the Settings menu.

Once you’re in the Settings window, the Devices choice should be in the top row.

This is where you go to connect Bluetooth devices, printers, and other devices.

5: Select “Bluetooth and other devices”

In the left-hand sidebar of the Devices panel, “Bluetooth and other devices” will appear first. Click here.

You should notice a Bluetooth indicator on your laptop. Ensure that it is turned on.

There should be a notice saying that your laptop is “Now discoverable as your PC’s name” beneath the toggle.

6: Click “Add Bluetooth or other device”

Click the + sign within the Bluetooth and other devices menu. It is adjacent to “Add Bluetooth or other device.”

7: Select Bluetooth in the “Add a device” window by clicking Bluetooth

Once the “Add a device” window appears, you will be presented with many alternatives. Choose Bluetooth.

8: Find your AirPods in the list and click on them.

With your AirPods placed within the case. The light continues to blink. It should be on the list of available devices.

In rare circumstances, your AirPods may appear in the list as Headphones. Please wait a few seconds. The precise name of your AirPods should then show.

Click it to connect your laptop to the network.

9: Click Done

Upon completion, you should see the message “Your gadget is ready to go!”

Select the Complete button. Remove the AirPods from their case. And you can begin utilizing them. That is all!

If you would want a visual demonstration of how to do it, you may watch this brief YouTube video.

“Wait, I recently completed these procedures. Why am I still having trouble establishing a connection?!”

The actual method of connecting is quite simple. However, it is fairly uncommon for people to continue to experience problems.

If you followed all of our instructions but were still unable to connect, do not fret.

In the next part, we will discuss the most common challenges and solutions for connecting AirPods to a laptop.

Why won’t my AirPods pair with my Windows laptop? 5 reasons & fixes 

One last reminder before proceeding with the troubleshooting methods. It is crucial to ensure that your AirPods are functioning properly.

You may attempt to use it with other devices. If you are also experiencing problems, a fix may be necessary.

We’d urge you to visit your nearest Apple shop. You will receive the best technical support from them.

But for Windows-related issues, we’ve got you covered. Here are the prevalent problems and their answers.

1: Common Bluetooth connectivity errors

As with any device, your laptop’s Bluetooth capability is susceptible to malfunctions.

There is nothing exactly incorrect. It’s only that it may malfunction momentarily on occasion. Similarly to other electronic devices.

This is why you may occasionally connect your AirPods in an instant. Nonetheless, it may require multiple attempts at times.

Sometimes you can connect, but after a few seconds you are unplugged. In certain instances, you may be unable to connect at all.

It is difficult to pinpoint exactly why this occurs. But do not fret. We have other alternatives for fixing these infrequent bugs.

How to correct:

There are simple ways to fix Bluetooth issues on your Windows laptop. They will be discussed below. And we’ll provide instructions on how to accomplish it.

Bluetooth may be toggled on and off.

The quickest solution is to turn Bluetooth on and off on your laptop.

Remember how we’re usually encouraged to do a power cycle on malfunctioning electronics?

Sometimes a quick reset is sufficient.

There are multiple ways to turn on and off Bluetooth on a laptop.

One approach to accomplish this is as follows:

  1. Launch the laptop’s Settings menu. Windows key + I is a keyboard shortcut.
  2. Click Devices then.
  3. Select “Bluetooth and other devices.”
  4. When you see the switch, turn it off.
  5. Wait a few seconds and then turn it on again.

Action Center is an additional method for turning Bluetooth on and off.

It is found in the lower right corner of the Windows desktop. Simply clicking it will cause a pop-up window to emerge.

There you will locate the Bluetooth icon. Click it to deactivate. Once more, please wait a few seconds. And then permit it.

You may then attempt to re-connect your AirPods to your computer.

Switch your laptop to Airplane Mode and back briefly.

Similarly, you can temporarily disable Bluetooth by using Airplane Mode.

It can also be found within the Action Center. Its icon is located to the right of Bluetooth.

You may also want to try clicking that. Enable it momentarily, then disable it before turning on Bluetooth.

Note that entering Airplane Mode will also disable your Wi-Fi.

Unpair and then reconnect your AirPods to your laptop.

Even if your AirPods and laptop are already linked, you may still have trouble connecting.

Unpairing your AirPods and laptop may resolve the issue. You’re essentially telling your computer to cease recognizing your AirPods.

To accomplish this, we must return to Settings. Following the Devices section. Then “Bluetooth and other devices.”

You should then be able to locate your AirPods under Audio. Click here. Then select the “Uninstall device” button.

Give it a few moments or seconds. Then attempt to reconnect and re-pair your AirPods. Please refer to the guide located at the beginning of this article.

2: Other devices are attempting to pair with your AirPods

The existence of other devices may be a contributing factor to your connection problems.

Perhaps you have an additional device nearby. Possibly a smartphone or tablet. Additionally, you may have previously linked your AirPods with these devices.

AirPods will occasionally detach from one device in order to connect to another.

How to correct:

A simple approach is to disable Bluetooth on your other devices.

You may just swipe down from the top of the screen on both iOS and Android devices. Click then the Bluetooth icon.

This will eliminate the conflict of where your AirPods should connect.

3: Your AirPods lack the most recent firmware

It is always advantageous to have the latest recent firmware. Obviously, this will be challenging for Windows and Android users.

It should go without saying. To upgrade your AirPods, you must use a Mac or an iPhone.

You may borrow Apple gadgets from someone you know who owns them. Or you may simply visit the Apple shop nearest you. They ought to be able to assist with the upgrade.

How to correct:

The firmware of your AirPods is simple to update. If you own an iPhone or a MacBook, follow these instructions:

Place your AirPods in their carrying case. It is preferable to charge it in advance.

Locate the Settings application on your Apple device. Like Windows, it employs a gear symbol.

After selecting Settings, locate the Bluetooth icon.

4: Locate your AirPods and click Connect.

The AirPods can then be left next to your Apple device. It should update automatically.

The Bluetooth driver on your computer requires an update

As with your AirPods’ firmware, it’s recommended to check if the Bluetooth driver on your laptop requires an update.

One of the most prevalent causes of driver failure is the absence of an update.

To upgrade the Bluetooth driver on your laptop, please refer to the steps below.

  1. Press the Windows key and R key. A search box must appear.
  2. Enter devmgmt.msc and then press OK. The Device Manager must launch.
  3. Locate Bluetooth and click the arrow next to it to access its settings.

The Bluetooth driver should be visible. Click the right mouse button and select “Update driver”

Windows should begin searching for the latest available driver.

5: The Swift Pair function may be the source of connectivity issues

“What is Swift Pair exactly?”

This capability has been available since Windows 10 was released. As the name implies, it is mostly for Bluetooth connections. This feature eliminates the majority of pairing steps.

You need only enable Bluetooth on your laptop and additional device. A notification will be displayed. Then, you click the Connect button.

It is activated by default. Occasionally, though, it may cause connectivity troubles.

You will need to disable the Swift Pair feature to resolve the issue.

From the Settings menu, navigate to Bluetooth and other devices.

Look for “Show notifications to connect with Swift Pair” in the device’s settings.

Click the toggle to disable it. This will turn off the Swift Pair option.

Bonus: Windows Update Defects

There are two potential solutions to this problem.

One is that Windows operating system updates must be installed. This absence of update may be impacting the performance of your laptop. Included Bluetooth connectivity.

Another possibility is that you have recently installed the newest updates. And when you did, the pairing of your AirPods and your laptop was disrupted.

How to correct:

It is usually a good idea to install the newest Windows updates; check to see if any are available.

To accomplish this, you must once more open Settings. Under Settings, locate the Update & Security section. Next, search for Windows Update. Select the “Check for updates” option lastly.

If so, you are permitted to download and install them.

If your most recent installation is experiencing Bluetooth issues, you can roll back an update.

Windows updates should only be reversed as a last resort. It is preferable to exhaust all other troubleshooting techniques first.