i love jordan, i love sport

i love jordan, i love sport

This content shows Simple View

Joel Reynolds

What To Place Below A Trampoline On Grass?

What should be placed beneath a trampoline on grass? Are there grass mats for trampolines? rubber mat for under trampoline? artificial turf beneath trampoline?

No, there is nothing to place on the grass beneath the trampoline. Concern yourself not with the grass beneath the trampoline. The grass beneath the trampoline is more lustrous than the rest of the yard. In truth, only the portion of the grass where the legs meet the grass is affected.

In rare instances, the grass beneath the trampoline turns brown. It depends on your region, trampoline position, and the amount of sunlight the grass receives. And the level of wetness in the grass.

What To Place Below A Trampoline On Grass?

Whenever we begin placing the trampoline on glass, the question of what to place below the trampoline arises. This question arises because we believe the trampoline legs will destroy the grass. We forget that the grass will die if we place something on the glass under the trampoline. Therefore, the best method is to place artificial grass, turf, or something similar beneath the trampoline.

However, you can go here if you plan to build your trampoline on a slope.

How is the grass beneath the trampoline impacted?

Trampoline mats are manufactured from materials that keep the sun’s rays from reaching the grass. Eventually, grass stops growing and becomes nutrient-deficient. Consequently, the grass beneath the trampoline begins to dry.

During hot weather, the grass under the trampoline shines more than the grass in the rest of the yard because it is shaded by the trampoline. They are harmed by prolonged exposure to sunlight.

Trampoline mats prevent rains and moisture from entering the grass. Likewise for sprinkler water. Eventually, your grass will become permanently parched and begin to die.

The weight of a trampoline’s legs is transferred to the ground. When jumping on trampolines, the legs sink deeply into the earth, causing the grass to die.

Several basic and simple procedures can be taken to prevent the grass beneath the trampoline from dying.

Reposition Trampolines

Moving to a trampoline is the best and most affordable alternative. Repositioning your trampoline will allow the grass to receive sufficient sunshine to live for a week.

Grass can normally withstand a week without sunlight with relative ease. After a week, the grass begins to lose its green tint. Therefore, it is preferable to relocate your trampoline every week.

Use Sprinkler

The use of sprinklers over both above- and below-ground trampolines is the second-best choice. The mat of a trampoline does not allow water or moisture to pass through. The trampoline mat will not prevent the grass from absorbing water.

Some individuals would believe that utilizing a sprinkler will harm the frame and cause it to corrode. However, they are primarily meant for outside use and have rust-resistant frames.

Utilize a mirror or other reflective object to reflect sunlight onto the grass. Nonetheless, this method is not considered optimal due to the fact that it is time-consuming and requires constant alignment of the reflecting object with the sun and grass.

This approach can prevent your grass from dying if it is applied appropriately.

Some grasses are adapted to thrive in dark and shady regions and do not require sufficient sunshine for growth. These grasses can be used under the trampoline without dying.

Use Ground-Based Trampoline

Utilize an in-ground trampoline to alleviate this tension. Simply bury your trampoline in the ground; there will be no more grass and no more problems. The attractiveness of your grass will grow once you bury your trampoline.

You may also bury your standard trampoline; there is no need to purchase a separate ground trampoline.

Can A Trampoline Be Used On Artificial Grass?

Yes, some individuals do not want to destroy the beauty of their garden at any cost. Additionally, they dislike the dead grass. If you are unwilling to relocate your trampoline, artificial grass mats or an under trampoline grass mat are recommended.

The benefits of artificial grass mats include:

  • Because they are smooth, “under trampoline mat” or “trampoline on artificial turf” can be used for trampoline safety. If a mat breaks, the individual will land on them with a smooth touchdown. There won’t be any severe injuries.
  • Additionally, you can encircle your trampoline with grass mats. Anyone who falls from the trampoline will land on a flat surface, averting catastrophic injuries.
  • With fake grass mats, you no longer require sand or rubber mulch in your yard.
  • Your garden’s attractiveness will be maintained without your intervention. They remain green and lush for an extended duration.


What To Put Under A Trampoline On Grass? – Frequently Asked Questions

Do trampolines harm grass?

In rare circumstances, the trampoline may harm the grass, or even worse, it may stimulate its development. Depending on where you live, where the trampoline is placed, and the amount of sunlight and water it receives, the grass may become brown or lush and green.

Where to place trampoline in the backyard?

The trampoline should ideally be set on flat ground, with adequate space around it to allow for safe jumping. Under the trampoline, it would be preferable to have bark or hard grass rather than concrete or asphalt. For optimal jumping, the ground must be level; else, you will bounce downward. Additionally, neither a fence nor a pool should surround it.

How to maintain grass under trampoline?

If you do not intend to move your trampoline much, you can occasionally set a sprinkler below it when it is not in use. In order to prevent any damage to the grass, a trampoline can be assembled on fake grass or even on a soft surface such as soft bark.

What should be placed beneath a trampoline on concrete?

If you intend to build your trampoline on concrete, you should read our page devoted to this topic. We have already resolved all issues pertaining to the trampoline on concrete.

What Should You Put Under a Trampoline?

You can use artificial grass mats or you can use mats for under trampoline. If you can control sprinklers, they are the most effective way to keep your grass moist. Additionally, an in-ground trampoline can be used to eliminate dry grass. Here you will find the finest inground trampolines.

Can charcoal be used in an electric grill? Two Techniques You Must Know



10 Tips for Safe Summer Barbecues - Shepherd Insurance

Can charcoal be used in an electric grill? Charcoal may surely be used in a grill. Additionally, wood chips can be used. To heat the plate’s surface and cook the meal, electricity is used as a fuel source.

The most typical method for placing wood coal on a barbecue is by utilizing a smoker box and aluminum foil. To achieve the most significant results, you must perform the action correctly.

This page examines coal in grills, including how they function, its most delicate characteristics, and the varieties of coal utilized. Please scroll down to learn and flawlessly implement these approaches.

#Can Charcoal Be Used On A Smokeless Grill?

The answer is affirmative. Certainly, charcoal can be used in a barbecue. Additionally, wood chips can be used.

Meat, fish, and vegetables can be cooked on electric and charcoal grills with direct heat beneath the surface. The devices are getting increasingly popular as they become more functional and appropriate for indoor use.

Numerous gadgets often feature a chip region beneath the heat source. Therefore, you may utilize coal even if the equipment was not designed for it.

#How do you ignite charcoal on an electric grill?

I enjoy adding charcoal to my grills when I’m grilling outdoors. Because it emits the same wood-coal scent as traditional devices without the inconvenience of setting a fire. However, some individuals may ask: “How can I utilize charcoal on a grill?”

There are multiple ways to use charcoal in a grill. Each procedure is straightforward.

The best way to confine them is to wrap them in aluminum foil. Smoker box or aluminum foil are two alternatives to tossing them directly into the stove or utilizing a separate wood chip pan.


Smoker Box

A smoker box is a miniature container that contains a handful of chips and emits smoke. This container is located on an appliance in the corner of a cooking surface. In the majority of cases, a device with a lid cover on top is optimal for this type of smoking.

Before placing the chips on the apparatus, you can moisten them. It increases the quantity of smoke produced. Adjust your device’s temperature so that the smoker box can absorb heat and produce smoke more rapidly.

After the chips have been ignited, the temperature can be decreased. Additionally, keep a water-filled spray bottle handy in case the chips catch fire.

More chips in a smoker box result in thicker smoke and a longer burn time. You may add additional chips to the box if you will be grilling for an extended period.

Here are the steps you should take:

  • Fill a small jar with chips halfway. Then, place the can upright in the gadget at the coil’s middle. To prevent burns, use tongs for this task.
  • The coils reach sufficiently hot to cause the chips to smoke and ignite. In a few minutes, the chips will emit smoke, imparting the ideal smoky flavor or aroma to the meat.
  • Because the smoke evaporates so quickly, you may miss it and believe that it did not work. Check the chips one hour later. You may combine several chips to impart a distinct aroma and flavor to your cuisine.

Aluminum Foil

Soak your chosen chips in water to begin. On the contrary, you utilize dry chips. Second, place the chips on thick or double-layered aluminum foil. Then, wrap the chips in aluminum foil.

Using a toothpick, create holes on the upper side of the foil through which the smoke can escape. Place the packaging on the device and cook for approximately ten minutes over high heat.


Can charcoal be used in an electric grill?

To produce a coal flavor in your food, you must use coal chips on your cooking apparatus. Upon combustion, they release smoke.

Can charcoal be used in an indoor grill?

Even if ventilation is adequate, indoor use of coal is never permitted. Wood coal emits CO until it is extinguished, thus please do not store the device indoors with newly used wood coal. It is possible to perish if coal is burned indoors.

How can I spice up my electric grills?

The option of liquid smoke is available. Liquid smokes are a quick and simple way to impart a smoky flavor to a dish.

How long does it take to use an electric lighter to light charcoal?

Allow the coals to heat for 20 to 30 minutes, or until they become ash-gray during the day and glow crimson at night. The easy-to-ignite wood coal can save a great deal of time.

Can smoking be done on an electric grill?

Electric equipment provide year-round grilling without the need for a gas tank or the purchase of wood coal. Due to this convenience, most devices lack a smokey flavor, however you can smoke food with a device by using the included smoker box or making your own.

Can charcoal be used on a smokeless grill?

The smokeless barbeque is suitable for individuals who prefer smokeless grilling. In a smokeless wood coal barbeque, a built-in fan blows air directly onto the coal. The coal therefore burns hotter, cleaner, and more efficiently.

Is an electric grill superior to charcoal grilling?

Although simple and quick to use, the appliance typically creates a less natural flavor than wood-coal grills.

They do not emit the same smokiness as coal when burned, and they do not release hazardous substances into food. The greatest benefit of grills is their simplicity of usage.

If you’re searching for the best devices, you can choose one from the list in this video.

#Final Reflections

Although grills use electricity to cook meats and vegetables, they may also be used with charcoal. The uncooked coal or wood chips impart the necessary smokiness and aroma to the food you intend to grill. We appreciate your reading!

Seemore: Best website for kitchen review.

How to connect several types of vehicle speaker connectors

What is a speaker terminal?

Connectors for speakers are utilized by Hi-Fi systems, loudspeakers, and other audio devices.

They provide a connection between the speakers and the amplifiers.

Their design establishes a strong electrical connection between your equipment and the speaker cable.

How to Select the Most Effective Speaker Connectors

Each speaker connector is straightforward to install and requires only a few basic tools.

To choose the optimal type, you must first examine the available terminals on your equipment.

Additionally, the rear end of your stereo equipment can feature a variety of connections. Occasionally, there are multiple types on each, such as amplifiers and receivers. Consequently, you will need a pair of pin connectors if your speaker includes spring clips. Moreover, if your amplifier or receiver includes binding posts, I recommend using either spade or banana connectors.

In addition, it would be prudent to determine the gauge of your speaker wires prior to purchasing connectors. Even while many connections were designed to operate with the most common wire sizes (12 – 18 AWG), others are intended for larger or smaller wires; therefore, it is important to check the dimensions to assure compatibility.

Connectors for speakers:

1. Binding posts

Binding posts are connectors mounted to the chassis that facilitate the connection of bare wires, spade plugs, pin connectors, and banana connectors.

Binding posts are the most commonly seen type of connector.

They are present on all sorts of amplifiers and speakers, from inexpensive to expensive.

You can use bare wire or connect banana plugs or spades to the end of the speaker wire when utilizing binding post connections.

How to link up:

  1. Unscrew the red (+) or black (-) cap.
  2. Insert the speaker cable into the post’s hole or wrap a spade connection around the base before tightening the cap.
  3. Insert the cable into the aperture on each post’s side. Here, you will have to connect banana plugs. Some receivers may have an end cap made of plastic that must be removed first.

There may be no aperture for a banana plug at the end of binding post-equipped loudspeakers. A few have, but it is more common in amplifiers.

With binding post connectors, you can either feed a bare wire into the hole and tighten the screw, or you can wrap a spade connector around the post and tighten the screw.

Binding posts are superior to basic screw terminals because they provide better contact and utilize these connectors.

2. Banana Plugs

Banana plugs are common single-circuit connections found in laboratory testing equipment.

Banana plug connectors have a standard diameter of 4mm, making them ideal for use with binding posts.

The spring-sided construction maintains good contact, even after multiple connections.

Typically, they attach to binding posts.

When utilized in speaker connections, they provide a strong electrical contact that transmits a substantial amount of electricity.

When using banana plug connections, you will need to purchase them as a separate wire accessory. Each wire will require four banana plugs, two for each end of the cable.

How to link up:

  1. First, ensure that the receiver’s power is off.
  2. Twist each exposed end of the copper wire so that the strands remain unified.
  3. Remove the screw from the bottom of the banana plug to check the hole is open. There are a variety of banana plugs, but the most contain a location to put the wire and a screw to secure it.
  4. Insert the wire into the drilled hole.
  5. The bottom of the banana plug must be tightened to ensure that the wires are secure.
  6. Connect the positive (red) banana plug to the appropriate red jack on the receiver.
  7. Repeat the same for the negative (black) speaker wire and plug it into the receiver’s blackjack.
  8. Insert the red plug into the red binding post of your speaker and the black plug into the black crucial post to connect the speaker line to your speakers. Now you can safely power on the receiver and alter its settings.

In addition, banana plugs can connect to cables in a variety of ways. The majority of the connections are screw-in and require a little screwdriver to fasten the wire. This is one of the easiest methods.

Also, some are self-crimping, which means they clamp the cable when the plug’s cover is tightened.

Others might necessitate soldering. Therefore, you should only choose these connectors if you are prepared to use a soldering iron.

However, there are banana plugs with screw-in connections that function flawlessly without soldering as long as you are careful when connecting them. This has the disadvantage that they may loosen over time. Therefore, you must verify the connection if you frequently reconnect them.

The majority of banana plugs feature a female connection on the bottom. This allows you to connect another banana plug. This is useful if you need to connect multiple speakers to the same terminal.

This may not be required frequently, but there are situations when it is necessary. If you need to connect a high-level subwoofer input to the front left and right speaker terminals, for instance, you can do so using this jack.

3. Spade Connectors

These connectors are available in several types, with crimp-on connectors being the most common.

These connections resemble metal forks with screw terminals and binding posts.

In many instances, they are sold as a set.

Spade connections guarantee that all wire strands are captured within the connection and protect the wire ends from unraveling.

How to link up:

  1. These can be connected using soldering, crimping, or screwing, just like banana plugs.
  2. Crimping is the process of using a tool to bend the end of the connector so that it is snugly connected to the wire. This could be an excellent alternative to soldering the wire. Additionally, be sure to use the right crimping tool.

After attaching your spades to the wire, unscrew each binding post and press it into position. Again, tighten the cap to secure them.

Using spade connections is preferable than using bare wire because they improve connection reliability.

Spade connectors are optimal for speaker wires positioned in close proximity to the wall.

4. Connectors with Pins

Pin plugs are tiny banana plugs with a similar origin. In rare cases, you may encounter them as banana plugs. However, they lack the spring contact present in banana plugs.

Pin plugs typically include pins with a diameter of nearly 2 millimeters. The pin is typically straight, however you can also find angled pins. Due to this, they did not use them as speakers, but they were still utilized.

Similar to banana plugs and spades, strip the wire of its insulation and connect the pins to the bare wire.

In addition, crimping or soldering is used to join them. They may also have a screw-in connection, however.

How to relate them:

  1. Undo the screw a bit.
  2. Insert the bare conductor
  3. Again, tighten the screw.
  4. Pull the speaker cable gently to achieve a secure connection.
  5. This speaker wire termination is typically ideal for spring clip connections. Consequently, depress the clip and insert the pin into the hole.
  6. You can also utilize pin connections with binding posts by inserting them through the central hole and tightening the cap, despite this not being the typical method of use.

The usage of pin connectors is safer than bare wires and increases the likelihood of a secure connection.

5. RCA Connectors

RCA connectors are RCA plugs, Phono plugs, and Cinch plugs, which are commonly referred to mistakenly as “Aux cables.”

RCA stands for Radio Corporation of America, and in the early 1940s they developed this connector for use in home radio equipment.

Due to their low cost, they eventually supplanted the “1/4” phone connections on the market.

They remain the most popular home audio connector because they are inexpensive and simple to use. However, they must be compatible with the corresponding jack.

How to link up:

  1. Remove the insulation from each wire end to expose 3/8 to 1/2 inch of bare wire. Utilizing color codes, be aware of which leads are good and which are negative.
  2. Unscrew the shells from the plugs of your RCA connectors and slide the covers over the wires.
  3. The positive terminal of the speaker wire should be soldered to the middle pin of the RCA, while the negative terminal should be soldered to the outside lead.
  4. Once the solder has cooled, slip the shell over the solder joints and tighten the screws on the RCA jack.
  5. Perform the same procedure on the opposite end of the speaker wire to finish the connection.

The most major disadvantage for professional audio is that they can quickly disconnected if walked on or kicked.

6. ”1/4″Inch Phone Connectors

Their construction is intended for usage with manual telephone switchboards. They no longer serve this function, though. They can now be used widely for years for professional audio hookups.

You may also refer to them as TRS connectors, which refers to the three contacts (on a stereo version of the connector): tip, ring, and sleeve. The tip is the sharpest section, the ring is the section following the first black hoop, and the sleeve is the region following the second. The tip and ring function as the left and right channel signals, respectively, while the sleeve serves as the common earth.

Prior to the advent of the Speakon connector, professional audio speakers were connected with two-conductor phone connectors.

The most common use of a stereo jack connection is as a headphone output on keyboards, pianos, recording equipment, guitar amplifiers, mixing tables, and home stereo systems.

This plug is sometimes referred to as a balanced “1/4” jack. Balanced audio connectors use TRS plugs (each end requires a balanced connection) to create a mono/single-channel connection that is far less susceptible to external noise, particularly when running long cables.

It would be beneficial to use them with the matching jack.

7. Speakon Connectors

The Speakon connections are the most recent audio connectors that sound like an alien race planning to conquer Earth.

As the first connector specifically designed for professional audio speakers, Neutrik designed these.

Speakon connections are commonly used in commonplace audio applications.

They are available in two, four, or eight pole configurations.

Physically, the two-pole and four-pole designs are interchangeable, allowing a two-pole plug to be inserted into a four-pole socket using only one of the two circuits.

The eight-pole design is physically more significant than the two-pole and four-pole designs.

How to link up:

  1. Unscrew the casing from the Speakon connector by turning it counterclockwise, then remove the chuck and the plug from the casing.
  2. Remove approximately three-quarters of an inch of the cable’s outside insulation to expose the two interior wires. Black represents the negative (-), whereas red represents the positive (+).
  3. Remove approximately 3/8 inch of insulation from the inner wires to reveal the bare wire.
  4. Insert the housing onto the wire with the threaded side facing the bare ends of the wire. Then, with the rounded side towards the interior of the bushing, plug the chuck into the wire.
  5. Gently twist the end of the positive wire and place it into the Speakon terminal on the “1+” insert. Turn the screw to tighten.
  6. Repeat the preceding steps to connect the negative wire to the Speakon terminal labeled “1-.” Additionally, tighten it using a screwdriver.
  7. Place the casing over the insert, put the chuck into the casing, and tighten the casing by hand.

Because the plastic may crack if you use pliers or other hand tools to tighten the case, it is better not to do so.

Speakon connections are superior to “1/4” phone connectors in three key ways:

  • They can handle higher current.
  • They are locking connectors.
  • When joining and disconnecting the connection, the contacts do not short.

They were designed to accept high-current impulses.

Male panel sockets and female plugs are included.

Female pins often connect to male panel sockets through a twist-lock mechanism that secures them within the socket.

This makes them the ideal choice for live sound applications, specifically for connecting power amplifiers to loudspeakers. Therefore, they are extremely prevalent.

8. XLR Connectors

These connectors were compatible with a variety of audio and video applications, including professional speakers.

Their design has a diameter of roughly 2cm and a range of 3 to 7 pins (male) or holes (female).

XLR connectors are utilized in a variety of musical and audio applications due to their balanced and secure construction.

Female connectors often receive output signals from devices (e.g., a microphone), while male XLR plugs are used to plug into inputs (e.g., an active studio monitor or a microphone pre-amp on a mixing desk).

Due to this, the most common XLR connector is the dependable mic lead with a male XLR pin and a female XLR plug at each end.

They function in microphone connections, audio interfaces, public address systems, monitor speakers, etc.

Their fame is both their gain and their detriment. Additionally, it is simple to replace a cable when necessary because they are commonly used in microphone cables, but it is also simple to confuse wires.

The current carrying capability of XLR connector cables is insufficient for professional use in large theaters and outdoor events.

Are speaker wire connectors significant?

Almost always, terminals on speakers and home audio systems are color-coded to indicate polarity. Positive (+) terminals are red, while negative (-) terminals are black. Nonetheless, this is not the case with speaker wires.

Not all speaker wires feature two-tone insulation or labeling for identifying convenience. Text, stripes, or dashed lines, for instance, indicate the positive terminal.

Assuming you are always uncertain, you can rapidly test the speaker wiring. However, the use of colored connectors will eliminate confusion.

Many individuals, especially those with multi-channel home radio systems, can avoid headaches and confusion by using speaker wire connectors.

Because they plug into the speaker terminals, the primary benefit of having speaker connectors is creating connections more quickly and easily. They create a solid and dependable electrical connection while limiting the risk of shorting caused by stray wire filaments touching adjacent binding posts when properly installed.

Additionally, high-quality connectors are an obvious method for reducing high-frequency noise.

Speaker connectors simplify the process of plugging in and unplugging audio equipment.

How to prepare wires for speaker connectors

Required equipment: cable/wire strippers Even while you could also use a knife or scissors, I strongly prefer strippers due to their safety benefits.

It is essential to begin and complete each end of the line, installing the connections before moving on to the next.

Preparation includes the following measures:

  1. Cut the end of the speaker cord so that no exposed copper wires are protruding.
  2. Carefully separate the distinct wires (positive and negative terminals) by approximately two inches. This creates sufficient space for work.
  3. Select a single wire and position the cutting edge of the wire remover approximately half an inch from the end. If your wire stripper has tags with multiple cutting sizes, select one that corresponds to the wire’s dimensions.
  4. Clamp the wire stripper down to remove the insulation and revolve the tool around the wire to create a clean cut.
  5. Using the wire stripper, remove the part of insulation that has been cut, taking care not to cut the copper below, since this will expose the bare wire.
  6. Using your thumb and forefinger, give the copper wire a little, gentle twist to ensure the individual strands stay together.
  7. Repeat the process with the remaining individual wire.

After forking speaker wires with exposed ends, you can now fix the connectors.

Additionally, verify that you observe and match the right polarities (positive and negative) of the wires and connectors in order to phase-correct your audio equipment.


Speaker wire connectors simplify the process of plugging and unplugging speakers from the stereo or amplifiers.

You should also be aware that the bare wire is unstable if the gap between the terminals is encased, as the strands can short circuit with other cables. Therefore, it is easier to insert a connector into terminals than a bare wire.

How To Connect PS4 To Monitor

A growing number of young people are embracing gaming consoles. Youngsters and even the elderly can now enjoy playing games thanks to this new technology. Gaming consoles are often connected to a television for playing games, but if your television is broken or you don’t have one, you’ll use a laptop or monitor.

Because of the larger screen, many people choose to use a monitor in these types of situations. But do you know how to hook up your PS4 to your TV screen? If that’s the case, we’re here to tell you how to connect your PS4 to a display in a straightforward manner. Here at TechTrada, you may find a wealth of information about the proper usage of technology devices. However, there are a few things to double-check before you begin. Take a look at that!

It’s critical that you double-check your PS4 and monitor’s available port connections before beginning the connecting process. Make a note of the ports on both of these devices where you can attach them.

High-definition multimedia port HDMI is available on PS4s with the latest technologies. Despite the fact that it can transfer both audio and video, most computer monitors lack HDMI connectors. If your PS4 monitor doesn’t have HDMI, you’ll also need an adapter to make the connection.

You’ll need an external speaker or headphones if your monitor doesn’t have one, or you may put your PS4 controller into your TV’s headphone jack.

Methods To Connect Your PS4 To Monitor

1. Connect Your PS4 To Monitor Through HDMI


  • Turn off your PS4 & Monitor to connect both devices.
  • Using anHDMI cable,you need to connect one end of the HDMI port on your PS4 and the other end into your PC monitor.
  • Now, if both ends are connected correctly, plug in the power cables and switch on both devices.
  • Check if your computer monitor detects your PS4, if it doesn’t you must check your HDMI connection or consider replacing it if needed.
  • If your monitor is connected with the PS4, you can now customize settings like resolution with your PS4 controller.
  • After all, settings are done, enjoy playing games on your computer monitor.

Related items:

Customize and protect your PS 4 controller with a unique designed skin decal. With the unique designed PS4 decal to your liking, game time can now be a one-of-a-kind experience.

2. Connect PS4 to PC Monitor VGA


If your PC monitor has a VGA port instead of HDMI, no need to worry. You can connect your PS4 to a monitor with a VGA port.

See how you can connect your PS4 to PC Monitor VGA

  • Same in a way you have connected your HDMI cable, connect the one end of your VGA cable to the monitor and another one to the adapter.
  • You can also plug in speakers or headphones to the adapter.
  • If it doesn’t directly connect with the adapter, you can use the HDMI switch to connect your PS4 to the monitor.
  • You can use the HDMI switch power cable to power up your PS4.
  • Attach one end of the HDMI to the Switch input and another one to the PS4.
  • Now, if all the settings are done, switch on the monitor and both of your devices will be connected.
  • Go ahead and enjoy playing games on your motor.

3. Hook up using DVI to HDMI Converter / Cable


Both HDMI and DVI use digital signals. Using any of these will not have any negative impact on the quality. Buying a soundbar with an optical output may be a better option if you’re aware that DVI does not handle audio transmissions. Getting an HDMI to DVI cable is all that is required. HDMI to DVI converter DVI can also be used to display (monitor connector).

Check out this DVI-to-HDMI converter cable guide for connecting your PS4 to your HDTV!

 Connect the PS4’s HDMI cable to the HDMI output port, and the monitor’s DVI port to the other end of the cable. You must connect the other end of the HDMI to DVI converter and the DVI to the display using the HDMI to DVI converter.

Select the appropriate input choices and then power on your PlayStation. The loudness can also be tested.


4. Connect using HDMI to Composite Converter


If you do not intend to purchase a soundbar for any reason, then you can still benefit from utilizing this strategy. You will need a converter that goes from HDMI to Composite, a cable that goes from HDMI to HDMI, and a wire that goes from Composite to Composite. Connecting your PlayStation 4 to a screen utilizes an approach that is rather distinct from the norm.

How exactly do you go about utilizing this approach?

1- To begin, repeat the previous steps to attach one end of your HDMI cable to your gaming console (PS4) and the other end of your HDMI cable to a composite converter.

Connect the power cable for the USB device to the HDMI converter.

2- Join your display to the composite cable using the appropriate connector.

3- Now Turn on your display screen, then choose the switches and inputs that you want to use, and then enjoy playing your game.

Several things to think about

An immersive gaming experience can be easily achieved through any of these straightforward and efficient approaches. If you only follow these easy steps, you will be able to easily enjoy your gaming experience, but you will need to be extremely careful when setting up the entire setup. If you want to avoid any kind of dangerous situation, you need to make sure that you follow each stage of the process with the appropriate amount of care and concentration.




An easy way to connect a PS4 to a computer monitor may be found here. These simple tips are essential. It is now clear how to connect your PS4 to a computer monitor.

The game will run more smoothly with only a few easy tweaks. Visit our website to learn more about these and other tech-related tips and techniques. You’ll be amazed at how much you’ll learn just by looking around.

See more :



Best 29-Inch Monitors

How to measure skateboard wheels?

Skateboard wheels come in sets of four, and they each need eight bearings, which are sold separately. Each wheel has two bearings built into it. This lets the wheel spin freely on the axle of a truck.
The diameter of a skateboard wheel is always measured in millimeters, and the density of a wheel is measured by its durometer on a “A Scale” or “B Scale,” which shows how hard it is.

We think that 52mm wheels, an 8″ board, and 139 or similar-sized trucks are a great place to start. But wheels come in many different sizes, shapes, and colors, and like everything else in skateboarding, what you like is what matters most.

How big should my wheels be?

Most skateboard wheels are between 48mm and 60mm in size, and different sizes are better for different types of skating or terrain.

Your skateboarding hardware and equipment choices will change as you get better, but here’s a general idea of how different-sized wheels work best:

  • Small (wheels between 48mm and 51mm)

Smaller skateboarding wheels are suitable for skating flatground. In the 1990s, wheels under 50mm were very popular, but now most wheel companies start measuring at 50mm.

Small skateboard wheels are more likely to get stuck in cracks or on rocks, but wheel bite is less likely because there is more space between the wheel and the board.

  • Medium [52ml to 54ml wheels]

This size of wheel is good for all kinds of street and transition skating. All of the wheel brands we carry make wheels in this size range, and they come in different styles and hardnesses. If you’re building your first complete skateboard, we recommend starting with a 52ml wheel.

  • Large [55ml – 60ml wheels]

Bigger wheels have more surface area, which makes the whole thing more stable. More contact with the ground also makes it easier to keep speed, which is why ramp and vert skateboarders usually choose bigger wheels.

Even though they can change the weight of a skateboard and you might need risers to stop wheel bite, larger wheels are less likely to get stuck in cracks or small things.

  • Cruiser, Longboard & 60ml + wheels

Most wheels over 60ml have a very low durometer, which makes them easy to ride on even the roughest roads. This type of wheel isn’t good for doing tricks, so they are usually found on cruisers, longboards, and other skateboards that aren’t in the shape of a popsicle.

What does it mean to say “durometer”?

The hardness of skateboard wheels is measured by a tool called a durometer. Usually, a “A Scale” is used to measure them. Most manufacturers use this 100-point gauge. However, they also use the B Scale, which is 20 points lower than the A Scale. For example, a 100a wheel is about as hard as an 80b wheel.

Low durometer wheels are softer, grip more, and make for a smoother ride. High durometer wheels, on the other hand, are harder, grip less, and give a more natural sense of speed when riding.

Most companies that make skateboard wheels offer wheels with different hardnesses and formulas that are clearly made for different types of skating. For example, Bones STF and Spitfire Formula Four 101D are hard wheels for street skating, while Bones SPF and Spitfire Formulas Four 99D are better for transition and ramp skating.

There are different shapes and styles of skateboarding wheels.

Skateboard wheels all do the same thing, but you can choose from a lot of different shapes and sizes. At Black Sheep, we always suggest checking out a product in person, where our staff is happy to help and give advice. Here’s a rundown of the different types of wheel shapes we carry, though:

  • Normal/Standard

A “normal”-shaped skateboard wheel has a small contact area (the part of the wheel that touches the surface) and beveled edges that are slightly curved. Every wheel brand we carry has this style, and some wheel brands only have one shape in their whole line.

  • Conical

Conical skateboard wheels have a larger contact area and very slightly curved sidewalls. This is helpful for skate ramps because it makes it easier for skateboarders to lock into the coping.

  • Radial

Radial wheels on a skateboard are the opposite of conical wheels. They have a larger contact area and edges that are more strongly beveled than regular wheels. This gives more space between the wheels and the ground, making the ride smoother even on the hardest surfaces.

  • Core

The “core” of a skateboard wheel is a separate area, usually made of plastic, that holds the bearings. Sometimes the core will look like the spokes in a bicycle wheel, while other times it will be less obvious. They are made to have a softer hardness without affecting the stability of the bearings. They can also be lighter than other skateboard wheels.

  • Cruiser

The very low durometer of these wheels makes for a smooth ride. Most of the time, they are not made for skateboarding tricks, but you can find them on vinyl cruisers, old school setups, and longboards.

What are the wheels on a skateboard made of?

Polyurethane is used to make the wheels for skateboarding. Before urethane wheels were made in the late 1960s, skateboarders used roller-derby or clay wheels to keep their boards moving. After urethane was invented, it became the standard material for making skateboard wheels quickly, and the rest is history.

What do flatspots mean?

Flatspots are flat spots on a wheel that form as the wheel is used. Some flatspots are easy to see, while others are almost impossible to see. However, skateboarding wheel manufacturers are always working to make wheels that are less likely to get flatspots and are of higher quality.


Flatspots do not mean that your wheels are broken. They are a normal part of a skateboard’s wear and tear, and they happen when the board is used often, when it gets caught on something that makes it move without the wheel turning, or when you do a power slide.

How many watts does a microwave use

How many watts does a microwave use

Even though microwaves don’t consume nearly as much electricity as power-hungry home equipment like air conditioners or washing machines, it’s still necessary to be aware of how much electricity a microwave needs in order to function properly.

Find out what the cost of installing solar panels will be in your region in 2022.

Enter your zip code

Check out the Cost of Solar.

Absolutely nothing to pay, and everything can be done online.

Gain access to the most competitive solar pricing from installers in your area.

Energy consultants who are unbiased and ready to assist you

Electricity consumption ranges from roughly 600 to 1000 watts when using a microwave.

When used for 15 minutes each day, a microwave will use around 6.1 kilowatt-hours of electricity each month and approximately 73 kilowatt-hours of electricity each year.

The monthly operating cost of a microwave is approximately $0.86, while the annual operating cost is approximately $10.36.

Installing solar panels is the most effective technique to reduce one’s monthly expenditure on electricity. Start evaluating your alternatives as soon as possible on the EnergySage Marketplace.

How much electricity does a microwave use?

Electrical consumption varies widely from microwave to microwave, but in general, they use between 600 and 1,000 watts (W). When using a microwave oven, you’ll need a 120-volt outlet and around 10 amps of power.

When it comes to the amount of electricity your microwave consumes, the most important factor is how frequently you use it. Assuming an average microwave uses 800 watts:

Using your microwave for 10 minutes a day for a week uses 0.94 kWh, a month uses 4.1 kWh, and a year uses 49 kWh.

Microwave use for 15 minutes per day consumes 1.4kWh per week, 6.8kWh per month, and 73kWh per year, depending on how often you use the device.

Running a microwave for 20 minutes per day at the highest setting consumes an average of 1.9% weekly, 8.1% monthly, and 97% annually.

Over the course of a year, different wattage microwaves use different amounts of electricity. Over the course of a year, here’s how much electricity you’ll consume with different wattage microwaves: 15 minutes each day, 105 minutes per week

How much electricity do microwaves use?

600 W 91.3 54.8 kWh
650 W 91.3 59.3 kWh
700 W 91.3 63.9 kWh
750 W 91.3 68.5 kWh
800 W 91.3 73.0 kWh
850 W 91.3 77.6 kWh
900 W 91.3 82.2 kWh
950 W 91.3 86.9 kWh
1,000 W 91.3 91.3 kWh


We’ll mostly be referring to the electricity used by microwaves in terms of kWh in this article. The reason is simple: your electric bill is measured in kWh, and you get charged based on the kWh of electricity you use per month!

Watts, amps, voltage, and more: what do they mean?

There are a lot of terms you can use to describe how electricity flows and is used by appliances. We’ve already mentioned most of them – here are a few definitions to keep things straight:

  • Volts (V): volts (short for voltage) are measures of electrical pressure differences. Put simply, voltage is the speed of electricity passing through a circuit.
  • Amps (A): amps (short for amperes) measure electrical current. Put simply, amps are the amount of electrons (which make up electricity) flowing through a circuit.
  • Watts (W) and kilowatts (kW): multiplying volts x amps gets you watts (or wattage). Put simply, watts are the rate of electricity consumption. A kilowatt is just 1,000 watts.
  • Kilowatt-hours (kWh): lastly, kilowatt-hours are how your electric bill measures your energy usage. Simply put, kilowatt-hours are electricity consumption over time.

You can think of these terms like water flowing through a pipe. Voltage is the water pressure, amps are the amount of water flowing past any point, and wattage is the overall rate of water flow through the pipe.

How much does it cost to power a microwave?

When you get your monthly electric bill, you only see the total amount you’re charged, not how much each appliance contributes to your final bill. Based on an average wattage of 800 W for microwaves (amounting to 73 kWh/year if you use your microwave like an average household would) and using state average electricity rates, here’s how the cost to run a microwave pans out over a month and a year:

Monthly and yearly costs to run a microwave by state

California 22.00 ¢ / kWh $1.34 $16.06
New York 20.59 ¢ / kWh $1.25 $15.03
Texas 12.56 ¢ / kWh $0.76 $9.17
Massachusetts 22.59 ¢ / kWh $1.37 $16.49
Florida 12.21 ¢ / kWh $0.74 $8.91
Virginia 12.58 ¢ / kWh $0.77 $9.18
New Jersey 16.20 ¢ / kWh $0.99 $11.83
Maryland 14.48 ¢ / kWh $0.88 $10.57
Washington 10.38 ¢ / kWh $0.63 $7.58
US Average 14.19 ¢ / kWh $0.86 $10.36


Note: average electricity rates are based on October 2021 data from the U.S. Energy Information Administration (EIA).

Calculate how much energy your own microwave uses

Calculate your microwave’s annual predicted kWh electricity use to get an accurate reading of how much power it consumes (or is expected to consume). Microwave power costs can be estimated by multiplying this figure by the typical electricity rate in your location. Divide the yearly cost by 12 to get an idea of how much it will cost each month.

Frequently asked questions about powering a microwave

What’s the best time to run a microwave?

If you’re on a time-of-use (TOU) rate plan, you are charged different amounts for electricity throughout the day. In general, it’s cheaper to use appliances during “off-peak” hours, which are usually overnight.

What size battery do you need to back up a microwave?

Almost any lithium-ion household battery, such the Tesla Powerwall or the Generac PWRcell, has a power rating of 4 to 5 kW or greater, and an useful capacity of 10+ kWh. Microwaves require roughly 800 W (0.8 kW) of electricity at a time, thus a battery can easily power and back up your microwave for extended periods of time without a problem.

How many solar panels does it take to power a microwave

On average, microwaves use about 800 W of electricity to stay powered. With solar panels rated at around 350 W, you’ll be able to power a microwave with about three standard solar panels.

What are ENERGY STAR appliances?

The United States government backs a program called ENERGY STAR, which verifies how energy-efficient various appliances are. An appliance earns the label “ENERGY STAR certified” when it demonstrates that it saves more energy than the typical appliance in its category does by meeting specified criteria. Because they are more effective in their utilization of electricity, ENERGY STAR appliances have lower operating costs than other types of home appliances.

How much money can solar panels save you?

The amount of money you can save by installing solar panels depends on a number of factors, including how much electricity you use, where you live, and the electric rates and plans available. Over the course of a solar panel system’s lifespan, most homeowners may anticipate seeing cost reductions of somewhere between $10,000 and $30,000, on average. It takes the majority of homeowners who shop for solar panels on EnergySage between 7 and 8 years, on average, for their solar panels to generate enough revenue to pay for themselves.

You should make sure that you are collecting multiple quotes from reliable installers before you decide to move forward with going solar, as this is one of the most effective ways to cut or eliminate your power cost. Going solar also helps the environment. You may acquire solar installation quotes from local installers by visiting the EnergySage Marketplace and then beginning to compare your options.

See more: bestkitchenproducts

How to Connect Bluetooth Headphones

Alexa is used by Amazon Echo, which is a smart home gadget and speaker. Alexa, Amazon’s voice-activated personal assistant, can do a lot of things, like play music.

Because the Echo isn’t very loud, it’s best to pair it with an external speaker for the best listening experience.

You can pair your Amazon Echo with other Bluetooth devices, which lets you stream music and podcasts to your headphones, earbuds, or even external speakers. Here’s what you have to do.

How to Connect Bluetooth Headphones to Amazon Echo

You can connect Bluetooth headphones or earbuds to your Amazon Echo by using the Alexa app on an iOS or Android device. Here’s how to get together.

  1. Put your Bluetooth headphones or earbuds in pairing mode.
  2. Open the Alexa app.
  3. Select More on the bottom menu.
  4. Select Settings.
  5. Select Device Settings.
  6. Under All Devices, select your Echo device.
  7. Select Bluetooth Devices.
  8. Select Pair A New Device.
  9. Under Available Devices, select your headphones or earbuds.
  10. Your headphones or earbuds will appear on the list of Paired Devices.

Say “Pair Bluetooth” to turn on Bluetooth on your headphones or earbuds the next time you want to connect. Once the first pairing is done, some Bluetooth devices may connect to your Echo automatically when they are in range.


How to Connect Wired Headphones to Amazon Echo

It’s easy to hook up your wired headphones to your Amazon Echo.

  1. If your headphones are both wired and wireless, turn off pairing mode.
  2. For the wired connection, you’ll need a 3.5mm audio cable with two male ends.
  3. Find the 3.5 mm audio output port on the Echo.
  4. Connect the 3.5mm audio cable to the Echo’s back.
  5. Connect the other end to the 3.5mm jack on your headphones.

How To Connect Amazon Echo To External Speakers

Using an Audio In port on your device is the easiest way to connect your Echo to your home speaker system. Before you start, you’ll need a cable that goes from 3.5mm to 2 RCA.

Use Audio In to link up.

  1. Put your stereo receiver to sleep.
  2. Plug the RCA cables into your stereo receiver’s back.
  3. Take note of where the RCA cables are connected.
  4. Plug the RCA cable’s 3.5mm end into the Echo’s 3.5mm audio output.
  5. Turn on your stereo receiver and set it to the correct input.

It’s just as easy to connect your Amazon Echo to Bluetooth speakers as it is to connect Bluetooth headphones or earbuds. Before you start, make sure the Echo is no longer connected to any other Bluetooth devices. Before you start the process, your Echo and Bluetooth speaker should be at least three feet apart.

Use Bluetooth to link up.

  1. Start pairing your Bluetooth speaker.
  2. Open the app for Alexa.
  3. Choose More from the menu at the bottom.
  4. Choose the settings.
  5. Choose Settings on the device.
  6. Choose your Echo device from the list of All Devices.
  7. Choose Bluetooth Devices.
  8. Choose Add a New Device.
  9. Choose your speaker from the list of available devices.
  10. Your speaker will show up on the list of devices that have been paired.

How To Use Amazon Echo As A Bluetooth Speaker

You want to listen to music on your phone, but you don’t have a speaker to plug it into. You’re in luck because your Amazon Echo can be used as a Bluetooth speaker. Here are the steps to set it up.

The iPhone

  1. Tell your Amazon Echo, “Alexa, pair,” or “Alexa, turn on Bluetooth.”
  2. Alexa will go into pairing mode and look for nearby Bluetooth-enabled devices. Open Settings on your iPhone.
  3. Select Bluetooth.
  4. Tap the name of your Echo’s device under “Other Devices.”
  5. When Alexa is able to connect to your device, she will say, “Connected to (phone name).”

On Android

  1. Tell your Amazon Echo, “Alexa, pair,” or “Alexa, turn on Bluetooth.”
  2. Alexa will go into pairing mode and look for Bluetooth devices in the area.
  3. Pull down the top screen to open the Quick Settings panel.
  4. Turn Bluetooth on.
    1. The Bluetooth Settings Screen will open and list all of the devices that are available.
    2. Tap and hold the Bluetooth icon to manually get to the screen where you can set up Bluetooth.
  5. Choose the name of your Amazon Echo from the list of devices that are available.
  6. A Bluetooth pairing request will be sent to you. Just click “OK” to agree.
  7. Your Echo will now show up on your phone as “Connected” for audio.
  8. When Alexa is able to connect to your device, she will say, “Connected to (phone name).”

Once you’ve connected the Amazon Echo to your device, you can use it as a Bluetooth speaker. Any sound you play on your iPhone or Android phone will be played by the Echo.

How to Setup Multi-Room Music with Amazon Echo

If you have more than one Echo in your home, you can play music on all of your speakers at the same time. Setting up music in more than one room is not hard. It doesn’t take long to do. Before you start, make sure that all of your devices are connected to the same Wi-Fi network.

  1. On your phone, open the Alexa app.
  2. Choose the devices.
  3. Click the plus sign.
  4. Choose Set Up Music in Multiple Rooms.
  5. Choose each Echo device that you want to use.
  6. Click Next.
  7. Who is your band? (you can create multiple groups).
  8. Tap Save.
  9. When you’re ready to listen, tell Alexa, “Alexa, play [music selection] on [group name].”

Now that you’ve connected all of your Echo speakers, you can stream music to more than one room at the same time.

Amazon Echo Won’t Connect to Bluetooth Device

Check to see if the profile your Bluetooth device is using is one that can be used. The Echo works with the Audio/Video Remote Control Profile (AVRCP) and the Advanced Audio Distribution Profile (A2DP SNK) (AVRCP). Here’s what you should do if your Echo device won’t connect to your Bluetooth device.

  • Make sure the latest update is installed on your Amazon Echo. “Check to see if there are software updates.”
  • Make sure the battery in your Bluetooth device is fully charged.
  • Keep your Echo and Bluetooth device away from things like microwaves and baby monitors that can mess up the Bluetooth signal.
  • Make sure that your Bluetooth device and the Echo device are at least three feet apart when pairing.
  • Delete the Bluetooth device if you have already paired it with Alexa. Try to match it up again.


Boosted Vs Meepo. Which Brand Of Electric Skateboard Should I Buy?


Boosted boards vs. Meepo boards. Really?

Does Meepo have a chance against Boosted, which is the king of electric skateboards?

It turns out that they go well together.

But don’t just believe me…

Let’s get right into it!

Selection Of Boards

The first and most important difference between the two brands is…

Boosted only has four different models of electric skateboards right now:

  • •Boosted Stealth
  • •Boosted Plus
  • •Boosted Mini X
  • •Boosted Mini S

Two of the four boards are “longboards,” and the other two are “mini” boards, which are smaller. All boards are made for the street, and the street only…

Meepo, on the other hand, has six different models:

  • •Meepo V3
  • •Meepo Mini 2
  • •Meepo NLS Pro
  • •Meepo AWD Pro
  • •Meepo Classic 2
  • •Meepo City Rider

Meepo’s website has six boards to choose from. Five of them are longboards and one is a “mini.”

The Meepo City Rider is also interesting. It is a skateboard with 6″ wheels that was made to ride on city streets. The board can easily handle rougher street surfaces like potholes, rocks, and cracks.

Meepo also makes the AWD Pro, which is a “all-wheel drive” board, as the name suggests.

Who Wins The Matchup?

In this case, I have to agree with Meepo.

Not only do they have more boards, but they also have boards with a bit more style.

The way Boosted’s boards are made is very similar, but Meepo has a city rider, an All-Wheel Drive, multiple longboards with handles, and even a mini-board.


Everyone wants to do their best. What do most people look at when they have money to spend on a car?

Details about how well it works, such as horsepower, acceleration, and top speed.

The same can be said for electric skateboards. After all, life is too short to move slowly.

Here are how each Boosted model did in terms of performance:

Boosted Stealth

  • •Top speed – 24 mph
  • •Range – 14 miles
  • •Incline Rate – 25%

Boosted Plus

  • •Top speed – 22 mph
  • •Range – 14 miles
  • •Incline Rate – 25%

Boosted Mini X

  • •Top speed – 20 mph
  • •Range – 14 miles
  • •Incline Rate – 25%

Boosted Mini S

  • •Top speed – 18 mph
  • •Range – 7 miles
  • •Incline Rate – 25%

Not at all bad. The Stealth and the Plus are the fastest models, and they also handle very well. They speed up very quickly and can go 14 miles without stopping.

Boosted works well, for what it’s worth.

Meepo V3

  • •Top speed – 28 mph
  • •Range – 11 miles
  • •Incline Rate – 30%

Meepo Mini 2

  • •Top speed – 29 mph
  • •Range – 11 miles
  • •Incline Rate – 30%

Meepo NLS Pro

  • •Top speed – 29 mph
  • •Range – 20 miles
  • •Incline Rate – 30%

Meepo AWD Pro

  • •Top speed – 34 mph
  • •Range – 15 miles
  • •Incline Rate – 35%

Meepo Classic 2

  • •Top speed – 25 mph
  • •Range – 25 miles
  • •Incline Rate – 30%

Meepo City Rider

  • •Top speed – 22 mph
  • •Range – 15 miles
  • •Incline Rate – 30%


If you thought Boosted did a good job, check out Meepo… The boards are going way too fast.

And let’s not even talk about the AWD Pro… It can go as fast as 34 mph and has a range of 15 miles.

And if that’s not enough, check out the Classic 2, which can go 25 miles before it needs to be charged.

Who Wins The Matchup?

Even though the Boosted Boards have great safety and handling features, it would be crazy to say that this round doesn’t go to Meepo.

I mean, really! Check out the details!

Incredible speed and acceleration, along with a huge range.

And every board has a hill climb rate of at least 30%.

Even the worst Meepo Board can hold its own against the Stealth (the best performing Boosted Board).

Again, Meepo wins this round.


Electric skateboards are expensive.

When we compare two different models or brands, price is a pretty important thing to talk about.

Boosted Prices

  • •Stealth – $1,599
  • •Plus – $1,399
  • •Mini X – $999
  • •Mini S – $749

I wasn’t kidding when I said that e-boards were pricey, but Boosted is really expensive. The Boosted Stealth, which is their top model, costs a whopping $1,599.

Even though they are of great quality and worth the money, many people still find it hard to save up $1,599 for them.

Meepo Prices

  • •V3 – $379
  • •Mini 2 – $379
  • •NLS Pro – $649
  • •AWD Pro – $849
  • •Classic 2 – $599
  • •City Rider – $679

Meepo is a good buy. Not a single board they sell costs more than $1,000.

And many of the boards, like the V3 and the Mini, are priced so that most people can buy them.

One of the good things about buying from a Chinese company is that you can get things for less money.

Who comes out on top?

Not even close here…

The most expensive board from Meepo is almost the same price as the least expensive board from Boosted.

Again, Meepo wins this round.

One Last Thing

Take into account the following…

The length of the Meepo V3 is 38 inches. The Boosted Plus and Boosted Stealth are the same length.

But the V3 can fly at 28 mph and has a range of 11 miles at a 30 percent slope. It goes up bigger hills faster and has almost the same range as before. Already, it’s better than anything Boosted has ever made…

But the best part is that it only costs 14 as much. You can buy four Meepo V3s for the same price as one Boosted Stealth ($379 for each V3, $1,599 for the Stealth).

We haven’t even started to think about the many other boards Meepo has to offer.

Meepo is not only cheaper, but they also do a better job.

Sorry, Boosted, your boards are still great, but it’s clear that you have to go with Meepo!


How to Put a TV a Few Inches Higher

Most of the time, two to three feet above your eye level is the best height and distance for watching TV. But if your TV is too low, it can be hard to raise it a few inches if you don’t know the right steps to take. We’ll talk about the best way to raise your TV a few inches so you can see it better.

To raise your TV a few inches, you can move the mount up if it is mounted or add risers to the legs if it is on a center console or table. Some mounts can be changed, making it easy to move the TV up a few inches. You can put rises either under the TV or on the TV stand. Some risers can be changed in height.

Here’s a quick look at the two ways:

1.How to Use a Mount

If your TV is already on a mount, you will need to change how it is set up. If it doesn’t, you can put up a new mount.

  1. Hold the mount on the wall with a level.
  2. Make sure the mount is level and doesn’t lean in any direction.
  3. Mark on the wall where the pilot holes will go. If it’s drywall, make sure you only mark holes where there are studs behind.
  4. Put the right drill bit on your power drill and use it to make the holes.
  5. Put the wall bracket on the wall.

If you want to know more about how to reuse a TV wall mount, check out our guide to the question “Can you reuse a TV wall mount?”

2.Using a riser or a mount that can be changed

If you need a certain height, look for a riser that comes in that height or buy one that you can change the height of. In fact, you can also get a mount that can be adjusted to give you some freedom.

How to raise your TV a few inches, step by step

First, if your TV is already mounted, you’ll have to raise the mount from where it is now. But if it isn’t, all you have to do is put in a new mount at the level you want.

Instruments needed

You will need a mounting bracket, a measuring tape, a screwdriver, a pencil, a spirit level, rawl plugs, a stud detector, a drill, a ladder or a step stool, the right wall anchor, and a spirit level.

Follow these steps carefully if you want to try to get your flat-screen TV off the ground.

Step 1: Find the wall studs

If your wall is made of drywall, this step is important. You can move on to the next step if your wall is made of concrete. Now, find where the stud is in your wall. This is important because the mount can’t hold weight if it doesn’t have any. If a mount is already there, the screws should make it easy to find the studs.

A magnetic wave stud finder can help you find studs if you are having trouble.

If you don’t have a magnetic stud finder, you can also tap on the wall and listen for a solid sound to find the studs. So, that’s where the frame made of wood goes through.

Step 2: Mark the spot where you want to put the TV.

Once you’ve found the stud, show where you want to hang your TV. This is very important because we don’t want the TV too high or too low.

All we want is a comfortable way to watch it, whether we’re sitting or lying down.

Step 3: Put the screws in.

When everything has been worked out, you can start using your drilling machine. All you have to do is drill a hole for your screw so that it stays in place and doesn’t come out of the wall.

Step 4: Put the bracket in place.

This step should be straightforward and easy. Put your TV screen on a table or other large surface and cover it with towels. Find the mounting holes on the back and attach the mount securely.

Tip: Make sure the screw holes are lined up correctly and that the screws don’t make it hard for the mount to tilt or turn.

Step 5: Put your TV in place after you’ve made all the connections you need to.

Connect any cables you want to your TV, such as an antenna cable, a power cord, or an HDMI cable. before you assemble it.

Then, with the help of another person, move the TV into place and use a screwdriver or Allen key to secure the two bracket pieces (this depends on the type of bracket).

Enjoy your TV, which is set up well.

But if you’re not sure how to mount the TV yourself, you can always ask a professional for help.

If you make a mistake and your TV is now too high, this guide will show you how to fix that.

Other ways to raise a TV a few inches than with a mount

TV wall mounts are now a popular choice for people who own their own homes. But not every home or wall is right for a TV wall mount. You might need an alternative if you don’t have enough space, have a unique style, or have a living room with an odd shape.

Try one of these creative ideas instead of forcing a traditional wall mount into your home.

TV Risers

TV risers are special stands that let you raise your TV a few inches. It’s a simple way to stand up a TV.

On the top of a fire

If you have a fireplace in your home, you can put the TV on top of it. This gives the living room a beautiful look and lets you watch TV and use the fireplace at the same time.

On Your Shelf

The TV can be put in the middle of a room with windows all the way up to the ceiling.

The TV can be put on top of a cabinet across from the seating area, and the back of the TV and its cables can be hidden by other parts of the cabinet.

In this set-up, the TV can also act as a wall between the dining room and the living room.

A TV stand on wheels

Most condos have open loft-style living rooms that are big and have a unique layout.

Putting the TV on a wall mount makes it harder to see and keeps it in one area of the room.

You have a lot of freedom when it comes to watching TV when you have a mobile TV stand.

The stand can be moved to different parts of the open room based on how much light is coming in, how many people are in the room, and how the furniture is set up.

A Cabinet with a Motor

People who live in homes today value flexibility and ease of use more than anything else.

With a motorized cabinet, the TV can be lifted up and out of the way while it’s being used, and then lowered so that the cabinet can be used for other things in the house.

It’s a smart and useful design, and the TV cabinet can be moved around the room.

How to Make a Dresser Into a TV Stand

After putting your flat-screen TV on a stand, you might find that it’s not high enough to watch comfortably.

You can change the height of the screen in a number of ways to get it to the right height. The biggest problem is making sure that the TV’s base is stable so that it doesn’t fall over.

Look for brackets that can be moved so that you can change the height of the table. Raise the base to the right height and secure it with the included fasteners. putting the stand where you want it, and then tightening the screws.

65 Inches TV Riser

Before you buy a 65-inch TV, make sure you have the correct riser. Here are some suggestions for how to use your 65-inch riser in this situation.

  • It can’t take up too much room in the room.
  • It must also be able to hold over or around 150 pounds.
  • Look for a surface that won’t get wet.
  • You can put it together on your own with the help of an easy-to-follow instruction book.


Once you know the steps to take, it shouldn’t be hard to raise your TV a few inches. This article is a very helpful guide on how to raise your flat-screen TV a few inches. This article also gives you other ways to raise your TV without using a TV mount.


On a 4k monitor, can you play games at 1080p?


When it comes to 4K monitors, most let you choose between a professional or a gaming resolution, which is a nice feature. These resolutions are great for HD video and high-end video games due to their increased pixel count and improved picture quality (almost four times the standard).

However, you may be imagining a “1080p on a 4k monitor” scenario. Full HD video can be played back on 4K Ultra HD monitors, but you won’t be able to see it in the 1920 x 1080p resolution you’re accustomed to seeing on these displays. Instead, a 4K Ultra HD screen requires an upscaling of the movie to accommodate the extra pixels.

There is no need to panic if you are still unsure about how this technology works. As a result, we’ve figured out and talked about all of the 1080p resolutions on 4K monitors in this article to make the concept more understandable for you.

Important Key points

  • Because of the lower processing demands of 1080p screens, you should expect to see an increase in refresh rates and reaction times if you’re shopping for gaming monitors.
  • Due to the higher cost and more work space required by 4K monitors, they must be factored into your overall budget and requirements.
  • 4K displays have four times the image density of 1080p screens, making them ideal for video editors and other creative professionals.

What Is a 1080p Streaming Quality?

There are many ways to make digital displays. The term “1080p” refers to a display having a resolution of 1,920 pixels on the horizontal and 1,080 pixels on the vertical. Filling up the screen with 1,920 pixels in each direction requires a lot of pixels.

Multiplying the number of pixels across (1920) and down yields 2,073,600. (1080). The pixel density is a measure of how many pixels are visible on a particular area of the screen. Approximately two megapixels in terms of digital photography. The number of pixels on a screen remains constant, but the density of those pixels changes as the screen’s size changes.

4K is a slang term for ultra-high definition.

A 4K monitor is nothing more than a regular monitor with a 4K screen attached to it. The monitor has a total pixel count of 8.3 million, divided into 3,840 horizontal and 2,160 vertical. To identify a 4K display, look for the resolution as “3840 x 2160” in the product specs.

Pixels (tiny black and white squares) are organized on the primary panel at a high “resolution,” which refers to the number of pixels per inch. The picture you see on the primary monitor is made up of several smaller groups of pixels. “K” in 4K stands for “Kilo,” which is a horizontal resolution of about 4,000 pixels.

What Happens When You Put 1080p on a 4k Monitor?

A 1080p screen cannot display the same level of clarity as a camera that shoots in 4K. However, 4K footage is still superior to 1080p footage when viewed on a 4K monitor.

A technique called “chroma subsampling” reduces the amount of color data a standard 1080p camera captures to one value for every four pixels. Although each pixel in a 4K video has a color value, downscaling to 1080p doesn’t degrade the image’s quality.

It’s important to note that this does not suggest that you should wait to watch HD content until it has improved in quality before doing so. On-the-fly upscaling takes place while the video is playing. Despite the fact that most major manufacturers’ 4K Ultra HD MONITORS do an outstanding job of upscaling, certain affordable versions don’t perform well. In order to get the greatest results, we recommend sticking with the brands indicated earlier.

If you’ve already purchased a 4K display, there are options for people who don’t like the quality of the upscaling. Both a high-end A/V receiver with built-in 4K upscaling and a 4K Ultra HD Blu-ray player (or even an Ultra HD Blu-ray compatible Playstation 5 or Xbox Series X) have an upscaling processor built-in, so you can obtain 4K upscaling in either of these ways.

When Compared To 1080p Displays, Why Does 4K Seem Better?

You could assume that your display’s pixel count is the limiting factor when it comes to image quality. In addition, the encoding process’s retention or erasure of data for each pixel affects the picture quality.

With the use of a technique known as “chroma subsampling,” the color data gathered by 1080p cameras can be reduced by up to 75 percent with minimal loss in quality. Subsampling came in handy when network capacity limitations made storing and delivering video more challenging.

Rather than reducing color data, 4K cameras provide each pixel with its unique chroma value. Downsampling 4K color data to 1080p is necessary since there are four times fewer pixels on a 1080p screen than a 4K screen (at a rate of 4 pixels of 4K data for every 1 pixel of 1080p that needs to be rendered). An extrapolation can be used to fill any holes that may be left by subsampling in the unique color values provided for each of the 4K pixels.

When viewed on a 1080p display, a 4K stream seems better than ordinary 1080p material because of how the 4K camera acquired color data and the following processing and translation to appear in 1080p. On the other hand, the difference between 1080p and 4K displays on a 1080p monitor will not be noticeable. If enhanced color data improves a picture’s clarity, this may be the only benefit.

Using a 1080p Resolution Setting, how do I connect a 4K monitor?

  • All settings in Windows > Settings > Devices and Display should be restored to their default values.
  • Second, I changed the 1080p monitor’s display to a 3840 x 2160 resolution (4k).
  • After that, I made the native 4k monitor my primary screen.
  • The “screen resolution” tab was accessible by doing a right-click on the desktop.
  • In order to make all of my screens look the same, I increased the little box’s opacity to 200 percent.
  • My next step was to move the desktop items to my native 1080p display, which was upscaled to 4k.

Both displays appear to display identically sized text and writing, since they consider themselves to be of equal size. Even though the 1080p display is a touch smudgy, I don’t mind that when I’m using Chrome to browse the web.

Is There A Difference Between 4K And UHD?

It doesn’t exist on a consumer-level. In a sentence, either word may be used. Video and film industry experts will tell you that what we refer to as 4K is not actually 4K at all. Technically, they’re correct.

A resolution of 4096 x 2160 pixels is required for 4K, a digital cinema standard. The first number represents a horizontal measurement, while the second is a vertical measurement because they both fit inside a 1.85:1 aspect ratio. The term “4K” makes sense because the horizontal resolution is approximately 4,096 x 3,840 pixels, which is more than double the previous 2K standard of 2048 x 1080.

A Quick Guide To Different Screen Resolutions

In the process of purchasing a new display, the native resolution is a vital consideration. 1080p is the most often used resolution in the world today. The most spectacular graphics cards are required to support 1440p and 4K, despite their increasing popularity. Choosing a new monitor (or screen size for couch gaming) should take into account the following resolutions:

  • 1280 x 720 – HD / 720p
  • 1920 x 1080 – FHD (Full HD) / 1080p
  • 2560 x 1440 – QHD/WQHD (Quad HD) / 1440p
  • 3840 x 2160 – UHD (Ultra HD) / 4K 2160p
  • 7680 × 4320 – FUHD (Full Ultra HD) / 8K 4320p

4K is the true successor to 1080p, which is universally accepted as the standard for high-definition television. Because of this, you’ll have a better understanding of how much more your graphics card is put to the test when running a resource-intensive program or game. Your computer’s capabilities are the only thing that matters here, as indicated earlier. A minimum frame rate of 60 fps is required for a smooth gameplay experience.

The more frames per second your display can handle, the better. More expensive 120Hz displays are capable of displaying 120 frames per second at 1080p resolution, although they are more expensive. Stutter-free gaming at a higher HD resolution than Full HD is possible with a 1440p display and a refresh rate of 144Hz. You’ll be able to do this as long as your graphics card and other components are powerful enough.

Is It Necessary To Use A 4K Ultra HD Monitor?

No, I don’t need a Porterhouse steak. Not! No, sirloin is not sufficient for you. Despite the fact that 4K is the new standard in the business, your HD MONITOR will still be able to function years from now, just like analog broadcasts did in 2009. However, if you see a 4K Ultra HD TV for gamers, you could be persuaded to upgrade.

If you are happy with your present MONITOR, there is no need to upgrade to 4K, but if you are shopping for a new television, it would be a mistake not to do so. As far as I know, the cost isn’t going to be an issue. A 50-inch 4K MONITOR costs $320 or less; a 55-inch model costs $400 or less; and a 65-inch model costs between $520 and $620. Wow, isn’t it wonderful?

What 4K content is available?

For a long time, there wasn’t much content available in Ultra High Definition (UHD). As a result, customers were reluctant to purchase the monitors. Since so much 4K content is now readily available, this isn’t an issue anymore.

Unconventional media, such as broadcast television in 4K and streaming video via devices like Roku and Amazon’s Fire TV, is now available in 4K. Users can even upload their own 4K videos to social media sites like YouTube. Video-on-demand (VOD) services like Netflix and Amazon Prime have a vast selection of 4K content available, including 4K movies and MONITOR series. Around 80 channels around the world are broadcasting in 4K. A 4K Blu-ray player is required to enjoy 4K movies purchased from sites like Amazon.com.

YouTube and Vimeo have grown increasingly popular for recording and distributing 4K content. Explore everything that piques your interest.

Choosing Between a 4K and 8K monitor is a difficult decision.

Despite the excitement around 4K Ultra HD, a new kid on the block has already emerged. 7680 by 4320 is four times the resolution of 4K Ultra HD and sixteen times the display resolution of Full HD, as the name suggests. (or 4320p). 8K resolution monitors are expensive, but also have a few other drawbacks, such as their high price point with scaling concerns.

At this moment, we do not propose that you get a bag despite your deep pockets. Even while development appears to be moving at breakneck speed, it will be some time before 8K replaces 4K Ultra HD as the industry standard. MONITOR technology is likely to progress significantly during the next few years, making current models obsolete.


Between 1080p and 4K computer monitors

The pixel count and quality of these photos are dramatically different. A 1080p on 4k monitor provides clear, high-definition graphics that are also known as HD displays. The term “ultra-high-definition” (abbreviated “UHD”) is frequently used to describe a 4K display. Since a 4K monitor has four times the total pixel count and twice the horizontal and vertical pixels of a 1080p panel, there is no comparison between 4K and 2K computer displays.

Additionally, this variation in monitor resolution and pixel count has an impact on refresh rate, cost, and other monitor performance elements.


The cost of 4K and UHD monitors is significantly higher than that of HD monitors. As a result, over the course of several decades, the industry has refined 1080p screens while keeping the component prices low. Despite the importance of conserving money, immersion need not be sacrificed.

Refresh Rates And Response Times

For a variety of reasons, gamers frequently prefer 1080p displays to 4K ones. Graphically, the latter is substantially more demanding on the graphics card and CPU, but has a significantly higher k-resolution. The responsiveness and refresh rates of 1080p displays are unquestionably better than those of 4K displays. Over the next few years, the performance gap between 4K displays and HDTVs is expected to narrow.

Desk Room Is Necessary

Many 27-inch and even larger 4K monitors are currently available. In other words, make sure you have enough room for a high-end monitor. Given their smaller size and reduced cost, 1080p displays are readily available in most companies and homes. 4K monitors’ increased tv resolution more than makes up for this, of course.

What to Know About 1080p on a 4K Display

Why does the 1080p video appear grainy on the 4K screen?

Because you’re converting a 1080p picture to fit on a 2160p/4K monitor, it looks pixelated. It’s blurry because it’s trying to fit inside the 4K resolution. Because running at a lesser resolution than the display’s native resolution always results in pixelated content.

What happens if you’re playing a 1080p game on a 4K display?

The experience will be similar to playing at 480p on a 1080p screen if you play at 1080p on a 4k display. You’re effectively using a 4k second monitor to display a 4x image. In order to see 1080p photos, you’ll have to use a 4k screen.

Do 4K games work on a 1080p display?

Many individuals will never be able to enjoy 4K gaming. On the other side, you can still run 4K games on your PC even if you only have a 1080p display. To help you out, we’re going to show you the ins and outs of upscaling your games to 4K resolution.

Is it possible to use 1920 x 1080 on a 4K display?

if by “4k” you mean a screen resolution of 3840 x 2160, then the answer is indeed yes. Because it’s a perfect square, the original picture fills precisely four pixels for each pixel on the screen; hence, different scaling is needed.

The Ending Observation

Despite the fact that 1080p does not look terrible on a 4K gaming panel, it does not look as well as it would on a 1080p gaming monitor. As a result, the vast majority of gamers are still using a 1080p resolution on a 4K display. Hopefully, reading this post will help you better grasp how to play your favorite video games on a 4K monitor with 1080p resolution.