i love jordan, i love sport

i love jordan, i love sport

This content shows Simple View

My Blog

How long does it take to learn to skateboard?

You seem to desire to learn to skateboard but are unsure how long it will take. A skateboard teaches no one “everything”. Learning to skateboard is a lifetime process that starts with the fundamentals and progresses. Let’s look at your progression and try to create a timeline.

Learning to skateboard takes a few days to a week depending on your physical ability, time availability, and dedication. Skateboarding takes years of practice, some quicker than others.

Daily practice and focus on the essentials will help you learn skateboarding quicker. Technical techniques like ollies, shuvits, and kickflips demand plenty of practice and devotion. So let’s have a look at what’s involved in learning to skateboard.


Skateboarding is a skill that can be learned.

You will learn quicker if you have good coordination and athletic abilities. Skateboarding may take longer to learn if you are unathletic or have bad balance. We all learn at our own rate.
Skateboarding takes between 12 and 3 years to master. In a year, you can master some fundamental techniques. 1-3 years old: sophisticated tricks. The chronology differs per individual.
Skateboarding is a skill like any other. You don’t have to be a fantastic athlete to learn to skateboard. You only need to practice every day.
We’ll presume you’re somewhat athletic. You are a good athlete who has excelled in a variety of sports.
Among your friends and family, you may be a mediocre athlete. Our timetable will be based on this. If you are more or less athletic, the timetable may change.
Let’s look at a broad timeframe for improving your skateboarding skills. Remember that your success will differ based on your previous skateboarding experience. This schedule implies you’ve never skateboarded and plan to regularly practice.
#Skateboarding Timeline

As you can see, some people learn quicker than others, but this gives you a broad notion. The more you skate with friends, the quicker you improve.
• Month 0-1: Learn to skateboard in the first month. Pushing, twisting, and halting helps.
With your new skills, you may start learning fundamental tricks like manuals, kickturns, ollies and riding up and down skate park obstacles.
• Months 5-8: Getting the fundamentals pays off big time. Slappies, shuvits, fakie bigspins, nice ollies, and modest board slides should be no trouble.
• Month 9-12: You can ollie 2 or 3 steps now. Now that you know ollies, it’s time to learn rails and ledges. Your first grind will feel great! This is also when you learn to heelflip and kickflip.
• 1 Year+: You can kickflip or heelflip well. Getting ollies is simple. The rest is up to you, that tre-flip is just around the corner!
#Skateboarding Basics
Let’s look at the first and most fundamental moves you must master and their duration. This timeline shows how long it takes to accomplish these movements at a basic level, but you won’t be able to do them properly without further practice:
#1. 10 min.
Balance is a process. Put your skateboard on grass or carpet first. Place your feet over the bolts put your weight on the board. Lean toward the toe, then the heel. Do this a few times to get a sense for the board’s reaction.
Take the board to a firm surface. Do the same. The board will desire to roll forward or backward. Relax and get accustomed to feeling the board move forward and backward. Slowly shifting your weight will not move it far.
You should now be able to stand on the skateboard without sliding.
30 min. Pushing
Now we need to move the board. Keep your rear foot down and step on the front bolts. Toe-side of the board with your rear foot.
With your rear foot, softly push yourself and the board forward. It’ll probably be a shuffle. Keep going, then place your rear foot on the skateboard and roll.
Pushing is the most basic move and is frequently disregarded by beginner skaters. You should be able to push reasonably rapidly, but not well. To get excellent at it, you will need to push a lot. The greatest way to learn is to push and roll.
1.5 h Carving

Carving is how skateboards turn. Toes to heels, remember in Step 1 Balance? By shifting your weight, you may spin the skateboard while rolling.
After a few pushes, place your rear foot on the skateboard and roll it. Let the board spin as you lean inward or outward. Now you carve.
5 min. rest

You must be able to halt. The simplest method is to softly place your foot on the ground and let it drag.
It will require some practice and balance, but it should be rather simple to master. Remember to keep your knees bent and your weight on your front foot. Improve your balance.
How Long Was That?

You mastered the essentials in an hour, 60 Minutes. You may not be skilled at the fundamentals, but you have learnt how to skateboard. You must commit to improving them.
You’ll need to practice the fundamentals for a long time before you’re ready to learn techniques. Practice is the only method to improve fundamental skills. The greatest way to learn to skateboard is to ride it everywhere.
The time it takes to master the fundamentals depends on how much and how frequently you practice them. Like any talent, the more practice you put in, the greater the outcomes. You will improve faster if you skate for 30 minutes daily than if you train for 5 hours once a week.
Frequent practice builds muscle memory. A person’s body understands how to perform something without thinking. It strengthens muscle memory quicker than sporadic practice.

How Long to Learn Tricks?

This is a challenging question. Many elements influence how long it takes to master a trick, but the most important is comfort on your skateboard. Even while the following timetable is indicative, it differs greatly from person to person.
The time it takes to learn a trick depends on your fitness, coordination, flexibility, fear tolerance, frequency of skating, etc. But don’t despair. It’s crucial to study at your own speed and push yourself when you’re ready.

Easy Tricks to Learn

Once you are comfortable with the fundamentals and riding your board, you may learn some easy tricks quickly. They may not be showy, but they will help you get more familiar with your board and improve board control.
So if you fall, it won’t hurt too much. Each one should take approximately ten minutes to learn if you are familiar with your board and the fundamentals.


Turn your board over so the griptape is down. Under the board your toes. Get on your board! You will land on the board’s wheels. The board flips easily and you don’t have to leap very high to get on.


Turn the board so one pair of wheels is on the ground and the other is looking upward. Stand on the deck and wheels.
Your aim is to start the board rolling. The Rail Stand is the trickiest element. Lean toward the wheels and jump. You should land bolts and the board should roll!

One hand your board. I like to grasp the nose, whereas some prefer the side. Jump up, bend your knees, and land bolts. Rather of lowering the board to the ground and landing on it, I want to make it contact my feet while leaping.


It’s based on the Caveman. Bent down and hold the toe side with your rear hand. Jump off the ground with your front foot on the heel side. Land bolts with your front foot on the board. The boneless is a great move for riding up obstacles.
Congratulations! You just learnt 4 techniques in under an hour. You are increasing your board control and board comfort. It’s crucial to maintain practicing these tricks and fundamental skills to create muscle memory and familiarity with your skateboard.

How long do skateboard bearings last ?

Bearings are essential to the performance of skateboard wheels. Skateboard bearings that are well-functioning will improve the performance of your skate wheels.
Skateboard bearing life expectancy? When deciding how long your skateboard bearings will last, there are a number of elements to keep in mind. If you take care of your bearings, they may endure for a year or more.

It is critical that you know when to change skateboard bearings since without high-quality bearings, your skateboard will not function properly.

How Long Do Skateboard Bearings Last?

Despite their little size, skateboard bearings have a significant impact on the performance of your board. The amount of time your skateboard bearings last is directly proportional to how often you skate. Keeping them clean and well-maintained can extend the life of your bearings.

Skateboard bearings have an average lifetime of one to two years if properly cared for and maintained.

Also, remember that too much of a good thing isn’t so good. Wetness, sliding, and high-speed leaping may shorten the lifespan of your skateboard’s bearings. Keeping an eye on how your skateboard bearings are being treated might help you avoid having to replace them more often than necessary.

Rust will form on your bearings if they are exposed to water for an extended period of time. Rusty bearings are never a good thing when it comes to your skateboard wheels.

As an extreme sport, skateboarding is performed in a frantic way, with tricks and demonstrations performed at breakneck speeds most of the time. If you like doing jumping-off feats while on a skateboard ride, it is likely that you will need to change your skateboard bearings more often.

When you slide, your bearings have to do a lot of effort to keep you moving. A lot of sliding might also cause your bearings to wear out far faster than they should.

How to Extend the Life of Skateboard Bearings

If you take good care of your skateboard bearings, you will be able to extend their service life by many years.

Keep your skateboard bearings clean and in good working order by following these simple guidelines. You should check them every now and again, particularly if you detect something unexpected. This may help to prevent your bearings from experiencing total and rapid wear.

Always clean your skateboard bearings after exposing them to water in order to prevent rusting. Please avoid using your skateboards when it is raining, and avoid rolling on wet or swollen surfaces as much as possible.

Do not use oil on your bearings until they have been thoroughly cleaned. Putting oil on filthy bearings is pointless since the dirt and dust will clog the bearings and prevent them from functioning.

In order to get bearings that will endure for many years, it is not advised that you choose alternatives that are the cheapest available. However, you are not need to purchase the most costly models. It is just a question of doing your homework and asking your more experienced friends for their recommendations on the finest skateboard bearings.

When Should You Replace Your Skateboard Bearings?

If you have rusted skateboard bearings, you should replace them as soon as possible since they will impact the general operation of your skateboard. Bearing replacement is necessary for a variety of reasons, one of which is the most evident.

If the shields and balls of your bearings have gone missing, you should replace them as soon as possible with new ones. Accidents may occur if you are skating without these components.

If you notice any unexpected sensations when riding your board, such as roughness or stiffness, you should inspect your bearings for probable issues immediately. Unless cleaning and lubricating them make any difference, it is time to purchase a new set of bearings for your vehicle.

The Importance of Keeping Bearings in Good Condition

If skateboard bearings are not properly maintained, they will wear out more quickly and prematurely. In the event that you do not repair your bearings, despite the fact that you have previously detected anything strange about these components, they will eventually cause harm to your wheels as well.

Elements of a skateboard are linked with other parts of the board. The slightest aspects of your skateboard’s operation can aid you in identifying the source of the problem and preventing more serious issues from arising later on.

This has the potential to preserve your whole skateboard and provide you with the option to continue to enjoy your ride on your old but trustworthy board for the longest amount of time possible.

When purchased separately, skateboard bearings are not prohibitively expensive. However, if your bad bearings have already caused damage to your wheels, you will need to purchase both components at the same time, which might be quite expensive.

The proper maintenance of your skateboards will not only prevent them from becoming obsolete too soon, but it will also save you money. Most importantly, it will protect you from being involved in an accident or suffering major injuries as a result of malfunctioning components on your skateboard.


Skateboarders that are responsible know how to take excellent care of their skateboarding equipment. Boards that are in good working order can keep you safe from any mishaps.

Rather than just providing you with information on the typical service life of your skateboard bearings, this article on how long do skating bearings last will also offer you with advice and instructions on how you will be able to prolong the life of your skateboarding bearings. We also spoke about when it would be appropriate to repair your bearings.

It is critical that you be knowledgeable about these topics in order to extend the life of not just your bearings, but also the life of your whole skateboard.

Did you find this article to be helpful? Please feel free to forward this information to others. Guys, please be careful on your journey!

iSteady Pro 4: the ultimate skateboard action camera gimbal

iSteady Pro 4: the ultimate skateboard action camera gimbal

Skateboarding and skaters are difficult subjects to photograph.

The correct gear can only be obtained if you’ve mastered the foundations of skateboard videography, including how to record lines and runs while following them.

For less than $500, you can easily catch the best tricks and maneuvers at a skatepark, bowl, or vert ramp in 4K and 5K.

Creating a web ad or video clip may now be done in a matter of days with simple video editing tools.

Skateboarders are notoriously difficult to film because of the numerous obstacles they face.

One of them is keeping up with the rider’s pace and keeping up with them.

To capture the greatest shots and action sequences, a skateboard videographer will need to get on their board and ride along.

Bumpy footage is the result of the filmmaker’s inability to keep a steady and balanced route.

In the end, there’s nothing worse than obtaining wobbly, high-resolution photographs even after capturing the optimal angles.

In today’s action cameras, electronic stabilization technologies are built-in, and they tend to work well.

But why give up filming in low light, capturing long time lapses, or capturing stunning aerial footage when a three-axis camera gimbal can do it all?

Hohem iSteady Pro 4

It’s no surprise that Hohem is one of the most popular gimbal stabilizer manufacturers in the world.

Action cameras, smartphones, and drones are some of the devices that the Asian company produces new solutions for.

It was made with skateboarding, snowboarding, skiing, hiking, climbing, and travel in mind when the Hohem iSteady Pro 4 was created.

Brushless motor-powered action camera gimbal enables riders capture ultra-smooth footage while they’re on the move.

A quick-mount-and-release clip, a spring buckle, and a power bank (14 hours of battery life) are included in the shooting equipment. This allows the camera to be charged while filming.

Bluetooth connectivity and full GoPro, DJI, and other comparable action camera compatibility are all part of the iSteady Pro 4’s features.

The gadget can remotely manage the GoPro shutter button, allowing you to capture a picture or record a video, while simultaneously doubling the battery life of your camera.

Flawless Stabilization

There’s no need to spend a lot of time or money learning how to get great film, and the results speak for themselves.

Pan, roll, and tilt axes may be readily controlled using a simple button layout.

Among the options provided is a pan and tilt follow, all lock, all follow (point of view), inception mode, and a sport-mode option (fast follow).

A skater’s line is kept steady and stable by the iSteady Pro 4, which provides a previously unheard-of level of smoothness even during dynamic maneuvers.

Getting into camera pairing mode is as simple as pressing the power button for three seconds, then double-clicking the “Pair” button.

The gimbal’s three-axis motor makes it possible to operate the GoPro with just one finger.

You can switch between working modes by pressing a button, and you can also activate quick camera movement by pressing another button.

Your movements will be tracked by the gimbal, which responds promptly.

Depending on the model, the shutter button may initiate a video clip or merely snap a picture of your subject.

There’s more you can do with the iSteady Pro 4 than meets the eye, however.

Extra Features

A full 360-degree rotation can be achieved with the 600-degree inception mode.

Using the motion timelapse tool, you may capture, for example, the movement of the sun and clouds.

For fast-moving subjects, you’ll push and hold the camera’s trigger button in sports mode.

As a final option, the point-of-view (POV) mode lets you create a clip where the spectator may see everything from their own point of view as the axis rotates.

When shooting in rain, snow, or fog, iSteady Pro 4 is splash-proof, making it resistant to water splashes.

At 365 grams in total, including the battery, the gadget is quite light.

Finally, the handle of the gimbal contains two 1/4 extension screw holes for attaching an extension rod, tripod, fill light, microphone, phone holder, etc.

Virtual remote control, 6-sided calibration and recenter system, mode switch, motion timelapse option, configurable settings and firmware upgrades are all features of the Hohem Gimbal app for iOS..

Since the camera’s shooting direction and other parameters may be controlled by the user in order to meet their specific filming requirements, this is a significant advantage.

How does a sealed speaker box enclosure work

How does a sealed speaker box enclosure work

There are a variety of advantages to using a speaker box casing for your speakers.

For starters, because the drivers are already in place, they end up producing greater sound as a result of their position.

The drivers’ enclosures are made of a material that is designed to absorb the vibrations produced by the drivers.

It seems likely that the vibrations caused by the table would cause a significant amount of the sound coming from the speaker to be drowned out if a driver was left on the table.

Another advantage of the speaker box enclosure is the ease with which it can be assembled, as all of the components are contained within a single unit.

Furthermore, the speaker box enclosure has the effect of causing sound to be produced in a particular manner.

After entering the enclosure, air is squeezed by the driving diaphragm as it travels through it.

The driving diaphragm filters the air that is forced out of the enclosure during operation.

Because of the way the diaphragm vibrates, it generates sound waves that travel to and through the cone.

These “backward” waves are dealt with in a variety of ways, depending on the type of enclosure that is being used at the time.

Among the various enclosure types available, the sealed enclosure is by far the most popular.

The backward waves that are generated in this form of enclosure setup, which is also known as an acoustic suspension enclosure, never exit the box.

Because the air is trapped inside a sealed speaker box enclosure, the air pressure fluctuates on a continuous basis.

As soon as the driver enters the scene, the pressure grows.

As the driver drives away from the vehicle, the level of pressure decreases.

The amplifier must constantly boost the electrical signal in order to handle the air pressure in sealed enclosures, which means they are less efficient than other designs. On the other side, sealed enclosures are more efficient than other designs.

Alternatively, the force generated by the air pressure maintains the driver’s position exactly where it should be at all times.

As a result, the sound that is produced is more precise and tighter.